Raleigh record cx

Raleigh record cx DEFAULT

Raleigh Bicycle Company

British bicycle manufacturer

The Raleigh Bicycle Company is a British bicycle manufacturer based in Nottingham, England and founded by Woodhead and Angois in Using Raleigh as their brand name, it is one of the oldest bicycle companies in the world. After being acquired by Frank Bowden in December , it became The Raleigh Cycle Company, which was registered as a limited liability company in January By , it was the largest bicycle manufacturing company in the world. From to , Raleigh also produced motorcycles and three-wheel cars, leading to the formation of Reliant Motors. Raleigh bicycle is now a division of the Dutch corporation Accell.[1]

In , the Raleigh Chopper was named in the list of British design icons in the Great British Design Quest organised by the BBC and the Design Museum.[2]

History[edit]

Early years[edit]

The history of Raleigh bicycles started in , when Richard Morriss Woodhead from Sherwood Forest, and Paul Eugene Louis Angois, a French citizen, set up a small bicycle workshop in Raleigh Street, Nottingham, England. In the spring of that year, they started advertising in the local press. The Nottinghamshire Guardian of 15 May printed what was possibly the first Woodhead and Angois classified advertisement.

Raleigh advert from

Nearly two years later, the 11 April issue of The Nottingham Evening Post contained a display advertisement for the Raleigh ‘Safety’ model under the new banner ‘Woodhead, Angois, and Ellis. Russell Street Cycle Works.’ William Ellis had recently joined the partnership and provided much-needed financial investment. Like Woodhead and Angois, Ellis's background was in the lace industry. He was a lace gasser, a service provider involved in the bleaching and treating of lace, with premises in nearby Clare Street and Glasshouse Street. Thanks to Ellis, the bicycle works had now expanded round the corner from Raleigh Street into former lace works on the adjoining road, Russell Street. By , the company was making about three cycles a week and employed around half a dozen men.[3] It was one of 15 bicycle manufacturers based in Nottingham at that time.[4]

Frank Bowden, a recent convert to cycling who on medical advice had toured extensively on a tricycle, first saw a Raleigh bicycle in a shop window in Queen Victoria Street, London, about the time that William Ellis's investment in the cycle workshop was beginning to take effect.[5] Bowden described how this led to him visiting the Raleigh works:

In the early part of , while looking for a good specimen of the then new safety bicycle, I came across a Raleigh in London. Its patent changeable gear and other special features struck me as superior to all the others I had seen, and I purchased one upon which I toured extensively through France, Italy and England during and In the autumn of the latter year, happening to pass through Nottingham, and with the idea of, if possible, getting a still more up-to-date machine, I called upon Messrs. Woodhead and Angois, the originators and makers of the Raleigh …[3]

It is clear from Frank Bowden's own account that, although he bought a Raleigh ‘Safety’ in , he did not visit the Raleigh workshop until autumn That visit led to Bowden replacing Ellis as the partnership's principal investor, though Bowden did not become the outright owner of the firm. He concluded that the company had a profitable future if it promoted its innovative features, increased its output, cut its overhead costs and tailored its products to the individual tastes and preferences of its customers. He bought out William Ellis's share in the firm and was allotted 5, £1 shares, while Woodhead and Angois between them held another 5, shares.[6]

In Frank Bowden's own lifetime, Raleigh publicity material stated that the firm was founded in ,[7] which was when Bowden, as he himself confirmed, first bought into the enterprise. Thus, Raleigh's 30th anniversary was celebrated in [8] The foundation date is confirmed by Bowden's great-grandson, Gregory Houston Bowden, who states that Frank Bowden "began to negotiate with Woodhead and Angois and in December founded 'The Raleigh Cycle Company'."[9] The December foundation date is also confirmed by Nottinghamshire Archives.[10] In recent years, the Raleigh company has cited as a foundation date but, whilst this pre-dates Bowden's involvement, the Raleigh brand name was created by Woodhead and Angois and the enterprise can, as demonstrated above, be traced back to

The company established by Bowden in December was still privately owned with unlimited public liability. In January , it became the first of a series of limited liability companies with Raleigh in its name. It had a nominal capital of £20,, half of which was provided by Frank Bowden. Paul Angois was appointed director responsible for product design, Richard Woodhead was made director responsible for factory management, and Frank Bowden became chairman and managing director. Some shares were made available to small investors and local businessmen, but take-up was minimal, and Bowden ended up buying most of the public shares. He subsequently supplied virtually all the capital needed to expand the firm.[11]

When Frank Bowden got involved with the enterprise, the works comprised three small workshops and a greenhouse. As Woodhead, Angois and Ellis, the firm had expanded round the corner from Raleigh Street into Russell Street, where also stood Clarke's five-storey former lace factory. To enable further expansion of the business, Bowden financed the renting of this property and installation of new machinery.[12]

Under Bowden's guidance, Raleigh expanded rapidly. By , the company occupied not only Clarke's factory but also Woodroffe's Factory and Russell Street Mills.[13] In November , Raleigh signed a tenancy agreement for rooms in Butler's factory on the other side of Russell Street.[14] Shortly after this, the company also occupied Forest Road Mill.[15] (Forest Road junctions with Russell Street at the opposite end from Raleigh Street.)

Bowden created a business which, by , was the biggest bicycle manufacturing company in the world, occupying seven and a half acres in purpose-built premises completed in at Faraday Road, Lenton, Nottingham.[16] It subsequently became very much bigger. Many say that Bowden invented the Bowden Cable but there is no evidence to support this myth.

Sir Frank Bowden died in and his son Sir Harold Bowden, 2nd Baronet took over as chairman and chief executive, guiding the company through the next 17 years of expansion.[17][18]

s Raleigh lady's loop frame bicycle
Humber Cycles

There was a resurgence in domestic and export demand for pedal bicycles and by February Raleigh had acquired all the Humber Limited trade marks. Manufacture was transferred to Raleigh's Nottingham works.[19] Raleigh-made Humbers differed from Raleighs only in chainwheels, fork crowns and some brakework.[7]

During the Second World War, the Raleigh factory in Nottingham was used for the production of fuzes. Bicycle production was reduced to approximately 5% of its peacetime capacity.[18]

In , Raleigh opened a bicycle factory at 6 Hanover Quay, Dublin, Ireland and commenced bicycle production there. The Raleigh (Ireland) business expanded and moved to 8–11 Hanover Quay, Dublin in The plant produced complete bicycles and Sturmey-Archer hubs, and remained in production until , when the factory burned down. Models produced there latterly were the Chopper and Triumph The head badges changed in the late s, possibly after the passing of the Trade Descriptions Act in the UK. Dublin-made machines no longer had "Nottingham England" on the Heron or Triumph head badge, the panel being left blank instead.

Irish Raleigh Heron Badge

Motor vehicles[edit]

In , Raleigh started to build motorcycles and in , introduced the Raleighette, a belt-driven three-wheel motorcycle with the driver in the back and a wicker seat for the passenger between the two front wheels. Financial losses meant production lasted only until

In , the company acquired the rights to the Ivy Karryall, a motorcycle fitted with a cabin for cargo and a hood for the driver. Raleigh's version was called the Light Delivery Van and had a chain drive. A two-passenger version was followed by Raleigh's first three-wheel car, the Safety Seven. It was a four-seat convertible with shaft drive and a maximum speed of 55&#;mph (89&#;km/h). A saloon version was planned, but Raleigh shut its motor department to concentrate on bicycles again. Chief designer T. L. Williams took the equipment and remaining parts and moved to Tamworth, where his company produced three-wheelers for 65 years. The leftover parts from Raleigh carried an "R", so Williams chose a matching name: Reliant.

Raleigh Sports in the USA.

Raleigh also made mopeds in the late s and s as the bicycle market declined. The most popular of which was the RM6 Runabout. This model featured unsprung front forks and a cycle type calliper front brake which made it a very affordable mode of transport. Because of its success, production continued until February ; 17 months after Raleigh had stopped manufacturing all other mopeds.

Post-war U.S. export market[edit]

After World War II, Raleigh became known for its lightweight sports roadster bicycles, often using Sturmey-Archer three and five-speed transmissions. These cycles were considerably lighter and quicker than either the old heavy English utility roadster or the American "balloon-tire" cruiser bikes. In , Raleigh and other English bicycle manufacturers accounted for 95% of the bicycles imported into the United States.[20]

Raleigh's sports roadster, or British racer bicycles were exported around the world, including the United States. The company continued to increase imports to the United States until , when a rate increase in foreign bicycle tariffs caused a shift in imports in favour of bicycles from West Germany and the Netherlands. However, this proved only a temporary setback, and by , Raleigh was again a major selling brand in the US bicycle market.[21]

Raleigh RSW[edit]

In , Raleigh introduced the RSW 16, its long-awaited competitor to the hugely successful Moulton Bicycle. The new Raleigh shared several important features with the Moulton, including small wheels, an open frame and built-in luggage carrying capacity.

Late s Raleigh RSW. The RSW was Raleigh's competitor to the fully suspended Moulton Bicycle.

However, the RSW lacked the Moulton's suspension, which compensated for the bumpy ride that comes with small wheels.[22] Instead, Raleigh fitted the RSW with balloon tyres, which effectively smoothed the ride but at the cost of increased rolling resistance. Nevertheless, the RSW was pleasant to ride, and Raleigh's extensive retail network ensured its success.

The success of the RSW took sales away from the Moulton and put that maker into financial difficulties. Raleigh then bought out Moulton and produced both bikes until Raleigh also produced a sister model to the RSW, the 'Twenty', which was more successful and which remained in production well into the s.

Expansion and mergers[edit]

While bicycle production had steadily risen through the mids, the British market began to decline with the increasing affordability and popularity of the motor car. For much of the postwar era, British bicycle manufacturers had largely competed with each other in both the home and export markets, but saw the formation of the British Cycle Corporation by the Tube Investments Group which already owned Phillips, Hercules, Armstrong, and Norman. In , Raleigh bought the BSA Cycles Ltd., BSA's bicycle division, which gave them exclusive use of the former brand names New Hudson and Sunbeam. Raleigh also already owned the Robin Hood brand, and Three Spires with Triumph (cycles) also at their disposal.

BSA had itself acquired Triumph Cycle Co. Ltd. only five years previously. Ti added the Sun bicycle company to their stable in , and with two "super groups" now controlling a large portion of the market, it was perhaps inevitable that in , Tube Investments acquired Raleigh and merged the British Cycle Corporation with Raleigh to form TI–Raleigh, which now had 75% of the UK market. TI–Raleigh then acquired Carlton Cycles in Worksop, England that same year, at the time one of the largest semi-custom lightweight makers in the UK. Ti Raleigh gave total control of its cycle division to Raleigh and soon set about marketing many of the acquired names as budget ranges, though with Raleigh frames. The old British Cycle Corporation factory at Handsworth continued to produce non Raleigh branded product well into the s, with Raleigh branded models built in the main plant at Nottingham. However, the Sun branded bicycles were made in the Carlton factory at Worksop, England.

As a vertically integrated manufacturer in the mids, TI–Raleigh owned Brooks (one of the oldest saddle makers in the world), Sturmey-Archer (pioneer of 3-speed hubs), and Reynolds (maker of tubing). Carlton, which had been unable to make inroads in the USA market after a failed rebranding deal with Huffy, found success in the late s by recasting itself as "Raleigh-Carlton", a Raleigh-logo'd bike with some Carlton badging, and using the US dealer network to import and distribute bikes.

One consequence of the vertically-integrated approach was that Raleigh did not adopt ISO threading standards and dimensions until the s for most of its range (premium models were standardised earlier). Headsets and bottom brackets use 26 tpi threading and bottom bracket shells are up to 78mm wide. This means vintage Raleighs need to be restored with original Raleigh parts (no longer made, but sometimes available as "new old stock") or the frame and fork require modification.

The Raleigh Chopper[edit]

Main article: Raleigh Chopper

The Raleigh Chopper was designed by Nottingham native Alan Oakley,[23] though this has been disputed by Cambridge designer Tom Karen.[24] The Chopper was patented in the UK in and patented in the US in The bike was the "must have" item and signifier of "coolness"[25] for many children at the time.[26][27] The Chopper was first available for sale in June in North America. It went on sale in the UK in and sold well, and was a key factor in reviving the company's fortunes. The Chopper featured a 3-speed Sturmey-Archer gear hub, shifted using a top-tube mounted gear lever reminiscent of the early Harley-Davidsonsuicide shifter — one of its "cool" features. Other differences were the unusual frame, long padded seat with backrest, sprung suspension at the back, high-rise handlebars, and differently sized front (16") and rear (20") wheels. Tyres were wider than usual for the time, with a chunky tread on the rear wheel, featuring red highlights on the sidewall. The price was from approximately £32 for a standard Chopper to £55 for the deluxe. Two smaller versions, the Chipper and Tomahawk, also sold well.

The Mk 2 Chopper was an improved version from It had the option of five-speed derailleur gears in the United States, but all UK bikes had the 3 speed hub, with the exception of a model introduced in and only available in a bizarre shade of pink. This model was discontinued in The Mk 2 had a shorter seat and the frame modified to move the rear of the seat forward, this helped prevent the bike tipping up. The shorter seat also made it harder to ride '2 up' (2 people on the bike at a time). The Chopper remained in production until , when the rising popularity of the BMX bicycle caused sales to drop off.

Raleigh revisited the chopper design in recent times, with great success although the new version has had some changes to conform to modern safety laws. Gone is the top tube shifter and long integrated seat, but the look and feel of the bike remain.

–present reorganisations[edit]

In , production of Raleigh butted-tube bicycles reached 10, units a year. In , the former Carlton factory at Worksop closed and production was moved to a Lightweights facility at Nottingham. However, all bicycles made there afterward still carried the W for Worksop frame number designation. In , rights to the Raleigh USA name were purchased by the Huffy Corporation. Under the terms of the agreement, Raleigh of England licensed Huffy to design and distribute Raleigh bicycles in the US,[28] and Huffy was given instant access to a nationwide network of bike shops. The renamed Raleigh Cycle Company of America sold bikes in the US while the rest of the world, including Canada, received Raleigh of England bikes. At that time, production of some U.S. Raleigh models were shifted to Japan, with Bridgestone manufacturing most of these bikes. By , all Raleighs for the American market, except the top-of-the range Team Professional (made in Ilkeston) and Prestige road bikes (made in Nottingham), were produced in the Far East.[citation needed] Meanwhile, in the home market, Raleigh had broken into the new UK BMX market with their Burner range, which was very successful.

In , the leading German bicycle manufacturer Derby Cycle bought Raleigh from Ti and Raleigh USA from Huffy. In , Derby opened a factory in Kent, Washington manufacturing two Raleigh lines, the bimetallic Technium road bike line, which used heat-treated aluminum main frame tubes, thermally bonded and heat-cured to internal steel lugs using a Boeing-developed proprietary epoxy &#; along with chromoly steel head tube and rear stays. Kent also manufactured the off-road chromoly steel Altimetric line (Tangent CX, Traverse CX, Tactic CX and Talon CX ). The factory closed in All Raleigh Cycle Company of America parts and frames from on were then mass-produced in China and Taiwan and assembled in other plants.

The high-end framesets offered for sale in Raleigh catalogues together with the frames built for Team riders were produced in Ilkeston by the Special Bicycle Developments Unit (SBDU) from to under the guidance of Gerald V O'Donovan; this production was moved to a new "Raleigh Special Products" division in Nottingham on closure of the Kent factory.

Raleigh Canada had a factory in Waterloo, Quebec from to [29] Derby Cycle acquired Diamondback Bicycles in [30] In the same year, Raleigh ceased volume production of frames in the UK and its frame-making equipment were sold by auction.[31]

In , Derby Cycle controlled Raleigh USA, Raleigh UK, Raleigh Canada, and Raleigh Ireland. In the latter three markets, Raleigh was the number-one manufacturer of bicycles.[30] Derby Cycle began a series of divestitures, because of financial pressure and sold Sturmey-Archer's factory site to the University of Nottingham and Sturmey-Archer and saddle manufacturer Brooks to a small company called Lenark. Lenark promised to build a new factory in Calverton but failed to pay the first instalment and the company entered liquidation. It was reported that the reason for selling the business, after extracting the cash for the factory site, was to have Lenark declare it insolvent so that neither Derby nor Lenark would have to pay the redundancy costs. Sturmey-Archer's assets were acquired by SunRace of Taiwan who relocated the factory to Taiwan and sales to the Netherlands. Sister company Brooks was sold to Selle Royal of Italy.

In , following continuing financial problems at Derby Cycle, there was a management buy-out of all the remaining Raleigh companies led by Alan Finden-Crofts.[32]

By , assembly of bicycles had ended in the UK with assembly and factory staff made redundant, and bicycles were to come "from Vietnam and other centres of 'low-cost, high-quality' production."[31] with final assembly taking place in Cloppenburg, Germany.

In , Derby was acquired by Pon, a Dutch company, as part of their new bicycle group, which also owns Gazelle and Cervélo. Pon now sell Raleigh under licence throughout Germany.[33]

In April , Raleigh UK, Canada and USA were acquired by a separate Dutch group Accell for £62m (US$m), whose portfolio includes the Lapierre and Ghost bicycle brands.[34]

Sport[edit]

Riders of the Raleigh Weinmann team

Raleigh had a long association with cycle sport. Most notable is the TI–Raleigh team of the s and s. In Joop Zoetemelk won the Tour de France on a Raleigh. In the mids the Raleigh team was co-sponsored by Panasonic. In , riding Raleigh-badged bicycles, Team USA scored several impressive victories at the Olympic Games in Los Angeles. The company also supplied bicycles to the French Système U team in the late s where Laurent Fignon lost the Tour de France to Greg LeMond by 8 seconds. The company's special products division made race frames, including those used by the Raleigh professional team of the s. Presently Raleigh as a company owns the Diamondback Bike brand as well. During the s Raleigh also supported British professional teams, including Raleigh Banana and Raleigh Weinmann. Raleigh's most notable riders were Paul Sherwin, Malcolm Elliott, Mark Bell, Paul Watson, Jon Clay and Jeff Williams.[35] It also sponsored a mountain bike team in the early s that also raced in road events.

In it was announced that the company would be creating a new Continental-level cycling team called Team Raleigh.[36] The Team were co-sponsored by the global shipping and logistics firm GAC in and were known as Team Raleigh-GAC. The season was notable for Team Raleigh's first victory in the Tour Series Round 6 and a succession of Premier Calendar wins, which resulted in team rider Graham Briggs finishing the season at the top of British Cycling's UK Elite Men's standings. Raleigh once again became the sole headline sponsor of the team in and the team re-paid the investment with high-profile wins in the Tour de Normandie, Tour of the Reservoir and Tour Series Rounds 1 and 2. Raleigh decided to withdraw from supporting a road team at the end of the season [37]

Archives[edit]

The Raleigh archives, including the Sturmey-Archer papers, are at Nottinghamshire Record Office.

Historic models[edit]

Green 3 speed Raleigh Superbe with 26" wheels and dynohub.

In media[edit]

Saturday Night and Sunday Morning, the debut novel by Alan Sillitoe, is partly set in Raleigh's Nottingham factory, Sillitoe himself being an ex-employee of the firm. Several scenes for the film adaptation starring Albert Finney were filmed on location at the factory itself.[38] In the movie American Flyers, David Sommers played by David Marshall Grant, is seen riding through St. Louis, Missouri, on a Raleigh bicycle from that same era. Later in the film, specialized bicycles are used for the race scenes in Colorado and training. In the bike messenger film Quicksilver a variety of Raleigh USA bicycles are used. –85 road bikes[39] are used throughout by notable players in the movie. Kevin Bacon's bicycle is a singlespeed '84 Raleigh Competition. While no differentiation is made in the film, at least three different configurations are seen on Bacon's bike during the movie: fixed-gear, singlespeed, and outfitted with 0-degree trick forks during various scenes in Bacon's apartment. A possible freewheel is suggested early in the film when Bacon dismounts while in motion and a distinct clicking sound is heard until the bike stops moving. A /5 Raleigh Grand Prix is used for the opening chase sequence, and a or '85 Super Course makes a brief appearance in the opening credits.[citation needed] In , Raleigh 's electric bikes featured in episode 4 of the season of The Apprentice[40]

See also[edit]

References[edit]

  1. ^"Accell Group Acquires Raleigh Cycle". Bike Europe. Retrieved 24 June
  2. ^"Great British Design Quest". GamesIndustry.biz. Retrieved 24 June
  3. ^ abBowden F, ‘To the Public’, The Book of the Raleigh, Raleigh, Nottingham, , p.8
  4. ^Harrison A E, ‘The Competitiveness of the British Cycle Industry, –’, The Economic History Review, News Series, Vol. 22, No. 2 (Aug ), p
  5. ^‘Rutulan’, Souvenir of the Raleigh Works, Raleigh, , p.4
  6. ^Lloyd-Jones R & Lewis MJ with Eason M, Raleigh and The British Bicycle Industry, Ashgate, Aldershot, , pp–49
  7. ^ abHadland T, Raleigh: Past and Presence of an Iconic Bicycle Brand, Cycle Publishing, San Francisco, , fig
  8. ^Hadland T, Raleigh: Past and Presence of an Iconic Bicycle Brand, Cycle Publishing, San Francisco, , p
  9. ^Bowden GH, The Story of the Raleigh Cycle, Allen, London, , p
  10. ^Dorrington M et al, Turning Back the Pages of Raleigh Cycles of Nottingham, Nottinghamshire County Council, , p.2
  11. ^Lloyd-Jones R & Lewis MJ with Eason M, Raleigh and The British Bicycle Industry, Ashgate, Aldershot, , pp–50
  12. ^Lloyd-Jones R & Lewis MJ with Eason M, Raleigh and The British Bicycle Industry, Ashgate, Aldershot, , p
  13. ^Raleigh catalogue, , p.1
  14. ^Nottinghamshire Archives DD/RN/1/1/1
  15. ^Raleigh catalogue, , p.3
  16. ^"£ million University of Nottingham deal will build on business heritage"[permanent dead link]. Nottingham Post. Retrieved 4 May
  17. ^"Raleigh: Cycles". gracesguide.co.uk. Archived from the original on 1 October
  18. ^ ab"Wheels of Fortune - The Story of Raleigh Cycles of Nottingham". nottinghamshire.gov.uk.
  19. ^Roger Lloyd-Jones, Myrddin John Lewis, Mark Eason, Raleigh and the British Bicycle Industry: An Economic and Business History, , Ashgate Publishing, ISBN&#;
  20. ^Petty, Ross D., Pedaling Schwinn Bicycles: Marketing Lessons from the Leading Post-World War II U.S. Bicycle Brand, Babson College, MA (), pp. 5–6 ArticleArchived 14 May at the Wayback Machine
  21. ^Petty, Ross D., Pedaling Schwinn Bicycles, pp. 5–6
  22. ^Conolly, Brian. "Small wheel obsession". bootiebike.com. Archived from the original on 2 January Retrieved 5 May
  23. ^"Raleigh Chopper designer Alan Oakley dies from cancer". BBC. 20 May Archived from the original on 20 May Retrieved 20 May
  24. ^"I designed the Chopper, argues Cambridge inventor". BikeBiz. 21 January Archived from the original on 23 September Retrieved 5 July
  25. ^"Chopper bike". Bike Hugger. 18 June Archived from the original on 17 October Retrieved 27 January
  26. ^Finlo, Finlo (15 January ). "Design classic that entranced kids". BBC News Online. Archived from the original on 19 May Retrieved 27 January
  27. ^"Raleigh Chopper". DoYouRemember Ltd. Archived from the original on 14 June Retrieved 27 January
  28. ^"Raleigh Museum". Mombat.org. 21 August Archived from the original on 21 February Retrieved 20 May
  29. ^"Raleigh quitte définitivement Waterloo". Granby Express. 3 December Archived from the original on 6 January
  30. ^ ab"Raleigh in the Last Quarter of the 20th Century". Hadland.me.uk. Archived from the original on 18 April Retrieved 20 May
  31. ^ ab"Raleigh in the last quarter of the 20th century". Archived from the original on 18 April Retrieved 22 August
  32. ^"Non-Australian manuf articles". Canberrabicyclemuseum.com.au. Archived from the original on 29 December Retrieved 20 May
  33. ^Steve Frothingham (19 February ). "Cervélo's White: We can grow by delivering". Bicycle Retailer and Industry News. Archived from the original on 23 February Retrieved 25 February
  34. ^"Raleigh sold to Accell for $m". Bike Radar. 26 April Archived from the original on 5 October Retrieved 26 April
  35. ^Cycling. "Raleigh - Weinmann ". cyclingarchives.com.
  36. ^Hedwig Kröner. "Raleigh back in the peloton from ". Cyclingnews.com. Archived from the original on 6 January
  37. ^https://www.cyclingweekly.com/news/latest-news/new-british-team-vitus-pro-cycling-announces-line-riders Retrieved 2 October
  38. ^"Saturday Night and Sunday Morning - visiting some of the filming locations". ciaranbrown.com. Archived from the original on 10 September
  39. ^" Raleigh USA catalog"(PDF). bulgier.net. Archived(PDF) from the original on 29 August Retrieved 5 May
  40. ^"The Apprentice Episode 4 - Electric Bikes". BBC iPlayer. 23 October

Further reading[edit]

  • Hadland, Tony (). Raleigh: Past and Presence of an Iconic Bicycle Brand. Van Der Plas Publications. ISBN&#;

A much expanded version of the text of this book, with full academic referencing, is held by the National Cycle Archive at Warwick University for the benefit of serious researchers.

External links[edit]

Sours: https://en.wikipedia.org/wiki/Raleigh_Bicycle_Company

Shopgoodwill

Please check the Seller Info tab for information regarding this seller.

Payments MUST BE RECEIVED WITHIN seven (7) DAYS from auction close.

Available Payment Methods:


Master Card Logo  Visa Card Logo  Discover Card Logo  American Express Card Logo
PayPal Credit Card Logo
PayPal Logo

This item cannot be shipped internationally.

This item ships via FedEx
Shipment Cannot Be Combined With Other Items

Shipping Weight (as determined by FedEx ): lbs.
Actual Weight: 30 lbs.
Handling Price: $

Shipping Calculator

Enter the following shipping information:

Payment

Payments MUST BE RECEIVED WITHIN seven (7) DAYS from auction close.

Available Payment Methods:


Master Card Logo  Visa Card Logo  Discover Card Logo  American Express Card Logo
PayPal Credit Card Logo
PayPal Logo

Shipping

This item cannot be shipped internationally.

This item ships via FedEx
Shipment Cannot Be Combined With Other Items

Shipping Weight (as determined by FedEx ): lbs.
Actual Weight: 30 lbs.
Handling Price: $

Shipping Calculator

Enter the following shipping information:

You May Also Like

Other Items From This Seller

Sours: https://www.shopgoodwill.com/Item/
  1. Do minecraft worlds end
  2. Pinterest funny quotes about life
  3. What is a heggstad petition

raleigh record - any good?

Originally Posted by cudak

Sorry, I can't agree with you that the Simplex delrin derailers used on the Grand Prix were any better then the Huret junk. Sure, the Simplex rear worked better then the Huret, but what's the point if the front splits in two?

Are you sure that you meant the Grand Prix model, and not the Gran Sport?

Then again, the Gran Sport used the Simplex system as well, although I believe they switched to SunTour in '75 or '

Take care,

-Kurt

I always considered the Simplex Prestige the best cheap derailleur available before the Sun Tour and Shimano upset the apple cart - even if you did have to figure on a maximum two year life span. You just budgeted for an extra derailleur and pedaled along happily. I'll still use a Simplex on a vintage bike today although, not surprisingly, I have one hell of a hard time finding them.

By the way, in all the time I spent riding with the Presque Isle (Erie, PA) Bicycle Club back then, I only knew of one Simplex front that failed from fatigue during normal use. Usually it was someone going down on the right side wiping out the rear. You ended up replacing the rears every two years because they wore and got sloppy. Or, by the mid's, you replaced it with a Sun Tour.

As to the Gran Sport - now that, to me, was a very late revelation (like about six months ago). Back in the seventies, all that was popularly available in my area if you wanted Campagnolo was either the Valentino and it's long cage derivitive (I considered them a better shifting Allvit, although I did like them and have a set in the box in the shop right now for a future project) and then the Record/Nuevo Record (which was unobtanium unless you could sell your girlfriend). I never knew of anyone who ran a Gran Sport on a new-ish bike. Right now, my only bicycle is a Raleigh Gran Sport, and I absolutely love that derailleur. If they would have been around more 35 years ago, I'd have never gotten infatuated with Simplex.

My understanding of Raleigh going with Japanese components was the model year. My least year working in the bike shop was '75, and I still hung around the place the following year, where cottered cranks ruled the cheap lines. By '77 I'd dropped out and never saw a Sugino/Sun Tour equipped Record or Gran Prix except in some catalogs run on the internet years later. In fact, when I picked up my Gran Sport, originally I thought I'd gotten a late 70's cheap Raleigh, as I attempted to figure out the difference in components.

Syke
Deranged Few M/C
Sours: https://www.bikeforums.net/
Raleigh Record Sprint Retro Bike Restoration

.

Record cx raleigh

.

Team Raleigh Record 1978

.

You will also like:

.



423 424 425 426 427